Clean
Waterless Engine & Internal Parts Cleaner
Fast-drying, no-rinse cleaner for removing oily residue, dust and grime from compatible engine-bay and internal automotive components.
- Size
- 400 ml
Directions
- 01 Make sure the vehicle is switched off and the engine/components are completely cool.
- 02 Remove loose dust before wet cleaning.
- 03 For controlled application, spray onto a microfiber cloth or soft detailing brush; direct spraying should be limited to appropriate non-electrical surfaces.
- 04 Work the product over the dirty area and allow approximately 30–60 seconds on stubborn grime without letting it dry.
- 05 Agitate heavy deposits gently with a soft brush if needed.
- 06 Wipe thoroughly with a clean, dry microfiber cloth. No water rinse is required.
- 07 Allow the area to dry completely before restarting the vehicle.
Caution
Do not spray onto energized parts, exposed connectors, damaged wiring, battery packs, orange high-voltage cables or hot components. Use with good ventilation.
Storage
Keep tightly closed away from heat, sparks and direct sunlight.
