Restore
Strong Rust Remover
Heavy-duty acidic treatment designed to penetrate and remove stubborn rust from suitable metal surfaces.
- Size
- 250 ml
Directions
- 01 Wear chemical-resistant gloves and eye protection before use.
- 02 Test first on a small area and use only on compatible metal.
- 03 Apply the product directly to the rusted area.
- 04 Allow approximately 3–10 minutes of contact while continuously monitoring the surface; do not allow it to dry.
- 05 Agitate with a suitable brush when necessary.
- 06 Rinse very thoroughly with plenty of clean water.
- 07 Dry the metal immediately and completely to reduce flash rust.
- 08 Repeat on heavy rust if required, then apply a suitable protective treatment such as Rust Protection Sealer.
Caution
CORROSIVE/ACIDIC. Do not mix with bleach/chlorine or other chemicals. Avoid skin/eye contact. Do not use on marble, natural stone, aluminum or sensitive paint without compatibility testing.
Storage
Store upright and tightly closed away from heat, children and incompatible chemicals.
