Protect & Enhance
Rust Protection Sealer
Post-treatment protective sealer designed to help protect cleaned bare metal and slow the return of rust.
- Size
- 100 ml
Directions
- 01 Remove rust completely using the appropriate rust-removal process.
- 02 Rinse the metal thoroughly to remove all cleaner residue.
- 03 Dry the metal completely before applying the sealer.
- 04 Shake the sealer gently before use.
- 05 Apply a thin, even coat over the clean metal.
- 06 Spread with a clean microfiber cloth if needed to obtain uniform coverage.
- 07 Allow approximately 15–20 minutes to dry before exposing the surface to moisture.
- 08 Avoid handling or wetting the treated area until the film has dried.
Caution
Use only on suitable clean metal. Test first, especially if the treated surface will later be painted or coated.
Storage
Keep tightly closed in a cool, dry place away from direct sunlight and excessive heat.
